EGO11 Technical Specification.The EGO11 comes equipped with an industry first, a bespoke solenoid - manufactured by MAC Valves USA - that incorporates twin flow control devices. These Solenoid Flow Controls each comprise a quarter-turn adjuster which has a pointer to indicate position on an incremental scale etched into the body of the solenoid. The Solenoid Flow Controls are used to independently control both the forward and rearward speed of the rammer and bolt so that, for the first time ever in a poppet marker, the user can tune the feel of the marker with a simple twist of a screwdriver. In the time it takes to turn off the tourney-lock, the EGO11 can be switched from a high speed, uncapped, free-for-all machine to the softest, gentlest, smoothest shooting poppet you have ever felt – or anything in-between. The analogue adjustment allows an infinite level of control over the speed of the rammer and bolt in either direction, providing unprecedented influence over the dynamic characteristics of the marker. With the EGO11 it looks like you really can have your cake and eat it!
Of course, the solenoid is not the only component to get a complete overhaul. Take a look around the grip frame and there are several things that should jump out, like the new POPS ASA for instance. POPS stands for Push-On-Purge-System and is a completely new concept in On/Off/Purging ASAs. The idea is simple, push back on the front ‘Bonnet’ section of the POPS and this depresses the air system valve pin – gassing up the marker – before latching itself into place; the operation takes just a fraction of a second. Once gassed up the bonnet stays in position until the pushbutton on the side of the POPS bonnet is depressed, at which point the bonnet pops forward and the marker purges itself of air; again, de-gassing takes a fraction of a second and very little effort. The new POPS features, T-Slot mounting to the frame, but this time with a longer adjustment range than on previous Eclipse ASAs. The POPS also incorporates front porting for the first time on an Eclipse ASA, together with a new fitting that seals without the need for Loctite or PTFE tape and which can be quickly and easily removed with a hex key. Shortened Macroline transports air into a second fitting in the new, angled swivel on the exceptional SL3 regulator.
The SL3 regulator needs little introduction at this point, it was first seen on last season’s SLS and went on to appear on the Geo2. The SL3 retains all of the simplicity of previous Eclipse regulators while introducing many new features. Notably, regulator seals with improved durability are incorporated into a new seal system that allows the regulator seal to be flipped or replaced as required - piston replacement is no longer necessary with this new design. Improved regulation across a wide range of input pressures has also been achieved, providing superior performance with both HP (High Pressure) and LP (Low Pressure) Air Systems – alternating between the two will have no effect on marker velocity. The benefit of this added stability is evident when it comes to the game, where you can shoot the EGO11 at full velocity right down to the last 200-300psi of tank pressure; you can really squeeze every last bit of performance out of your system.
Those who are observant may also notice the modified spacing between the SL3 regulator and the grip frame. The inclusion of the new solenoid has given the EGO11 the opportunity to spread its stance a little; the frame has been moved backwards allowing more room between the regulator and the trigger guard, just enough to add some additional support and control to the marker, but not enough to forsake the compact dimensions and sharp handling that Ego users have become accustomed to.
The EGO11 has received some interesting changes to the frame and grips. The new frame profile sees, yet again, a higher grip position, placing the rear hand still closer to the barrel axis and firing line. The all-new grip is slimmer in the middle section and actually sunk into the frame around most of its perimeter. These grips combine in turn, with a brand new molded rubber console that runs all the way up the back of the frame to add comfort and grip. The combination of grip and console make the EGO11 by far the most comfortable and ergonomic Ego to date. Further simple mechanical changes ensure that the grip screws clamp down firmly into place without the chance of crushing the grips or, more importantly, any internal components.
Inside the protective cocoon of the frame lies the Eclipse circuit board. Designed to negate the need for an expensive after-market ‘upgrade’, this board has all of the features that the discerning player needs. The large screen LCD module provides excellent contrast in even the brightest sunlight, using significantly less power than its OLED counterparts; indoors, a tru-color backlight can be customised to taste; furthermore, in the event of damage, the LCD module can be quickly and easily replaced. Twin trigger sensing circuitry – micro-switch or optoelectronic sensor – can be selected and tuned to individual requirements using multi-parameter trigger de-bounce algorithms. Prioritized solenoid drive circuitry produces superb shot-to-shot consistency and rate of fire accuracy. An expansion port allows the EGO11 to be connected to a PC using the optional Eclipse E-Portal kit which provides firmware re-programming, splash screen design and control parameter editing functionality. A low power, 16-bit microprocessor provides the brawn, and stable firmware, refined over years of tournament play provides the intelligence. With all the adjustability and functionality you could ever need, the range of features on the EGO11 is simply breathtaking: a refill counter; ROF indicators; timers; audible indicators; RF transmitter compatible; you name it, the EGO11 board will do it or support it.
Also inside the frame is the main interface between player and marker, the trigger. This improved trigger – with new bearing carrier and new spring system – has 5 points of adjustment: forward travel; rearward travel; magnetic return strength; spring return strength; and micro-switch actuation point. Designed in the ever-popular S-style, the trigger has the smooth, slop-free action that has been the backbone of Eclipse markers for years. The wide range of adjustability and the option of magnetic or spring return make it quick and easy to set up for individual taste without the need to break the gun apart in order to get at adjusters; as with everything in an Eclipse marker, simplicity and reliability are key.
Internally the Ego11 boasts the Zick2 kit; the Cure3+ bolt; the same LPR found on the SLs; the same LP protection vent that was found in the Ego10; and the same infra-red Break Beam Sensor System used on all Eclipse markers to date; all highly-proven, tournament-winning components.
Up front, you’ll find the new Shaft4 barrel. Supplied in the same 14”, 0.689” bore configuration that has been receiving outstanding reviews since its launch on the Geo2 early in 2010, this two-piece barrel has been re-designed for better efficiency and consistency and ported for a reduced sound signature; there really is no need to replace this exceptional, stiff arbour honed, premium barrel. Also coming soon, optional extra boost kits giving the user the ability to change bore size and tip length.
Finally, the EGO11 comes packaged in a new zippered case along with a full hex key set; oil; barrel sock; a full-colour 84-page manual; and a comprehensive spares kit which includes regulator components, o-rings, detents, springs and screws.
Weight – 882g (1.94lb) Including 14” Shaft4 Barrel, Battery, Feed Tube, POPS
Length – 543mm Including 14” Shaft4 Barrel
Height – 211mm
Width – 27mm
bC
LHL capo 77
